X Factor Complete Wash Bay System: Wall Mounted 220V Electric – Freedom Foamer Touch-Free Kit (3.5 GPM @ 3,000 PSI) - Tactical Strike
Wall Mounted 220V Electric | Freedom Foamer | Single-Step Touch-Free Wash
The X Factor Wall Mounted Wash Bay System – Tactical Strike is Chem-X’s most advanced fixed-installation setup for high-volume, professional touchless washing. Designed around the legendary Freedom Foamer, powered by a 7.5HP commercial-duty 220V pressure washer, and delivering foam via the ST-160 Single-Step Injector, this wall-mounted system is built to clean fast, efficiently, and without contact.
Perfect for fleet operators, municipalities, dealerships, and mobile wash professionals working from a shop, this system simplifies touch-free cleaning while maximizing power, durability, and results.
What’s Included in the Tactical Strike System
1. X Factor Wall Mounted 220V 7.5HP Electric Power Washer
- Flow & Pressure: 3.5 GPM @ 3,000 PSI
- Pump: Commercial Triplex Plunger with Oil Bath Crank Case
Manifold: Brass with Stainless Steel Valves
Drive: Direct Drive | Thermo Pump Protector
Motor:
- 220V, 1-Phase
- 34 amps at startup (50A breaker recommended)
- 1750 RPM TEFC (Totally Enclosed Fan Cooled)
- Thermal overload protection
Continuous-duty rated
Control Panel:
- NEMA 4 Watertight
- Heavy-Duty On/Off Cam Switch
- Auto Stop/Start Delay-Off System
25' power cord (plug end not included)
Frame:
- Powder-Coated One-Piece Bent Steel Base
- Wall-Mount Ready (16" on-center pattern)
- Dimensions: 28"H x 32"W x 16"D | Weight: 250 lbs
2. 44" Chem-X Freedom Foamer Lance
- ST-75s foamer with KEW inlet
- Stainless KEW fittings + Veloci Prima stainless QC fittings (USA made)
- Adjustable vented grip for comfort + control
- Olight Odin 2,000 Lumen Tactical Flashlight mounted
- KEW to QC adapter for switching to rinse mode
- Includes replacement foam agitator pad + O-ring
- Rated: 1–6 GPM | 1,000–4,000 PSI | Max Temp: 212°F (125–130°F optimal)
- Designed for single-hand use with high-pressure foaming or rinsing
3. MTM Hydro SGS35 Shut-Off Gun
- Ergonomic “easy-hold” trigger for reduced fatigue
- Italian manufactured with stainless live swivel
- Max Pressure: 5,000 PSI | Max Flow: 12 GPM
4. Suttner ST-160 Single-Step Foam Injector
- Plug-and-play injector for use with a single chemical line
- Uses 4–5x less soap than traditional style injectors
Constructed from durable stainless steel
Includes 9 interchangeable dosing nozzles
Rated for:
- 1–6 GPM | 1,000–4,000 PSI | up to 194°F inlet temp
5. 1 Gallon of Chem-X Old Glory – Touch-Free Active Foam
- Single-step acid-alkaline blend for touchless vehicle washing
- Removes road film, bug guts, salt, and grime
- Safe on paint, chrome, coatings, wraps, wheels, and glass
- Foam-on, dwell, rinse-off—no brushing required
💡 What Makes the Tactical Strike System Unique?
Feature | Benefit |
---|---|
Wall-Mounted 220V System | Space-saving, high-powered, fixed install for wash bays |
Freedom Foamer Lance | Effortless foaming and rinsing in one unit—no tool changes needed |
ST-160 Injector | Efficient single-chemical delivery with dialed-in precision |
Tactical Flashlight | Improves visibility in dark or low-light cleaning environments |
Old Glory Soap | True single-step, no-touch cleaning for fast wash cycles |
Pro-Grade Pressure Washer | Built for high frequency, high demand environments |
How to Use the System
Step 1: Power On & Pre-Rinse (Optional)
- Engage the wall-mounted system via the control panel
- Pre-rinse if desired to remove heavy debris
Step 2: Apply Old Glory
- Set ST-160 injector to desired dilution using included dosing nozzles
- Foam Old Glory over the entire vehicle (bottom to top for maximum dwell)
- Let sit for 30–60 seconds
- Do not allow to dry on the surface
Step 3: Rinse
- Flip the Freedom Foamer to rinse mode using the KEW to QC adapter
- Rinse top-down with consistent, even pressure
- Dry with microfiber towels or blow-off system for best finish
System Specs at a Glance
Component | Rating / Spec |
---|---|
Pressure Washer | 3.5 GPM @ 3,000 PSI |
Freedom Foamer | 1–6 GPM |
ST-160 Injector | 9 nozzles |
Shut-Off Gun | 5,000 PSI |
Frame Size | 28"H x 32"W x 16" |
Pro Tips for Best Performance
- Use warm water (120°–130°F) for better foaming and cleaning
- Replace dosing nozzles to fine-tune soap strength for seasonal buildup
- Don’t allow soap to dry—rinse promptly
- Use DI water if available for spot-free rinsing
- Replenish Old Glory regularly to ensure consistent touch-free results
Final Thoughts
The X Factor Wall Mounted Wash Bay – Tactical Strike System is the ultimate no-contact solution for professional environments. With a high-output, wall-mounted 220V pressure washer, the industry-leading Freedom Foamer Lance, and the efficient ST-160 injector delivering Chem-X’s powerful Old Glory formula, this system lets you foam, clean, and rinse faster—with fewer steps and zero scrubbing.
Mount it. Foam it. Rinse it. Mission complete.