Snake Oil Venom: No-Touch Graphene Vehicle Sealant Chrome Cannon Kit
No Touch. No Buffing. Just Shine, Protection, and Results.
The Snake Oil Chrome Cannon Kit is Chem-X’s ultimate no-touch foam sealant system, combining the slick, Graphene-infused power of Snake Oil with the precision and performance of the Chrome Cannon 2.0 Foam Cannon. This one-step rinse sealant is designed to dramatically boost gloss, slickness, and hydrophobic behavior, all with zero wiping or buffing.
Whether you're maintaining a ceramic-coated vehicle or adding fresh protection to uncoated paint, this kit provides instant ceramic performance without contact. Spray it on. Rinse it off. You're done.
What’s Included in the Kit
-
1 Gallon of Chem-X Snake Oil Venom – Graphene Foam Sealant
1 Chem-X Chrome Cannon 2.0 Foam Cannon
Cannon Accessories:
- Installed 1.15 mm nozzle + extra 1.25 mm nozzle
- Weighted pickup tube
- Foam agitator pad (installed)
- Extra agitator pad + O-ring + unclogging pin
What Is Snake Oil?
Snake Oil Venom is a touch-free foam sealant that applies a durable, Graphene-enhanced layer to paint, wheels, glass, and trim in seconds. Designed for use in a foam cannon or downstream injector, it bonds instantly to clean, wet surfaces and leaves behind a slick, glossy, and water-repelling finish.
It’s safe for:
- Ceramic coatings
- Clear coat and single-stage paint
- Chrome, plastic trim, glass, and vinyl wraps
Key Features & Benefits
| Feature | What It Does |
|---|---|
| No-Touch Foam Sealant | Adds Graphene protection without any wiping or buffing |
| Spray-On, Rinse-Off | Applies through foam cannon for instant results |
| Gloss + Slickness Booster | Enhances depth, feel, and reflectivity of coated and uncoated paint |
| Hydrophobic Barrier | Beads and sheets water to reduce spotting and ease drying |
| Fast & Efficient | Ideal for high-volume detailers, fleets, or maintenance washes |
| Safe on All Exterior Surfaces | Use on paint, wheels, glass, plastic, and chrome |
How to Use the Kit
Step 1: Wash and Rinse
- Start with a clean vehicle, touch-free or mitt wash using Old Glory, Stars + Stripes, The Don or Foam
- Rinse thoroughly to remove all soap
Step 2: Apply Snake Oil
- Add 2-3oz of Snake Oil to the Chrome Cannon bottle
- Fill the rest with water and shake to mix
- Foam onto the wet vehicle, panel by panel
- Let dwell for 30–60 seconds
Avoid applying to dry panels or in direct sunlight
Step 3: Final Rinse
- Rinse thoroughly from top to bottom with clean water
- Dry with a microfiber towel or air for a slick, streak-free finish
Check out our Complete Guide to Snake Oil for more information
Chrome Cannon 2.0 Features
- 34 oz HDPE wide-mouth bottle with built-in ratio guide
- Stainless steel internals
- Adjustable fan and chemical injection knob
- Weighted pickup tube for consistent soap draw
- Max PSI: 4,000 | Max GPM: 5.3 | Max Temp: 140°F
- Includes extra nozzle, spare agitator pad, O-ring, and unclogging pin
Pro Tips for Best Results
- Apply to wet panels only after your final rinse
- Use warm water (125°F–130°F) in the cannon for better dwell
- Do not allow product to dry on the surface
- Dry with a clean microfiber towel or forced air for a flawless finish
- Use deionized water if available for spot-free rinsing
What Not to Do
- Don’t use Snake Oil on dirty or dry surfaces
- Don’t mix with soaps or apply before washing
- Don’t apply in direct sunlight or to hot panels
Final Thoughts
The Snake Oil Venom: Chrome Cannon Kit is the easiest way to get ceramic-like shine and protection in a fraction of the time. No towels. No buffing. Just foam it on, rinse it off, and enjoy the results.
Shine in seconds. Protect for weeks. No touch required.