Liquid-X Vehicle Mitt Wash + Sealant Chrome Foam Cannon Kit
Slick Wash Meets Lasting Protection—One Kit, One Step
Looking to streamline your wash process and add long-lasting shine at the same time? The Liquid-X Vehicle Mitt Wash + Sealant Kit from Chem-X is your go-to setup. This simple, two-piece system pairs 1 gallon of Chem-X Liquid-X with a red Chrome Cannon 2.0 foam cannon, delivering a smooth, glossy wash with built-in protection—every time you pull the trigger.
Ideal for coated or uncoated vehicles, this kit helps reduce friction during washing while laying down a water-repelling, polymer-based barrier that boosts shine and speeds up drying.
What’s Included in the Kit
- 1 Gallon Chem-X Liquid-X – Polymer Sealant Wash
- 1 Red Chem-X Chrome Cannon 2.0 Foam Cannon
What Is Liquid-X?
Liquid-X is a polymer-infused wash soap that cleans your vehicle while applying a synthetic sealant. It enhances gloss, improves water beading, and provides a slick finish that helps protect the surface between washes.
💡 Key Benefits
| Feature | What It Does |
|---|---|
| Cleans + Seals in One Step | Removes road film while applying a polymer-based protective layer |
| Foam Cannon Ready | Optimized for use in the Chrome Cannon 2.0 |
| Enhances Gloss | Leaves a slick, just-waxed feel and added depth to paint |
| Safe on All Surfaces | Works on paint, chrome, glass, plastics, and wraps |
| Boosts Hydrophobicity | Helps water bead and sheet off for easier rinsing and drying |
How to Use the Kit
Step 1: Mix the Solution
- Add 2–3 oz of Liquid-X to the foam cannon bottle
- Fill the rest of the bottle with water
- Shake gently to mix
Step 2: Foam the Vehicle
- Rinse the vehicle to remove loose dirt
- Attach the red Chrome Cannon 2.0 to your pressure washer
- Apply foam from bottom to top for full coverage
- Let dwell for 30–60 seconds (do not allow to dry)
Step 3: Rinse Thoroughly
- Rinse from top to bottom with clean water
- Watch water bead and sheet as the polymers activate
Recommended Use
| Application Method | Ratio / Usage |
|---|---|
| Foam Cannon | 2–3 oz per full bottle |
| Wash Frequency | Every 1–2 weeks |
| Ideal Pairing | Works great before applying Snake Oil or Awesome Sauce for layered protection |
Chrome Cannon 2.0 Features (Red Edition)
- Wide-mouth HDPE bottle for easy filling and chemical resistance
- Adjustable fan pattern and foam output
- Weighted pickup tube ensures consistent draw
- Built-in ratio guide for easy dilution control
- 1.25 mm orifice installed (1.1 mm included for lower-GPM setups)
Tips for Best Results
- Use on a cool surface in the shade to avoid drying
- Do not let foam dry before rinsing
- For added shine, dry with a microfiber towel or forced air
- Use deionized water if available for a spot-free rinse
Final Thoughts
The Liquid-X Chrome Cannon Kit is the perfect introduction to touch-assisted maintenance washing with built-in protection. It’s fast, effective, and leaves your vehicle looking freshly sealed every time—without the need for extra steps or products.
Foam. Rinse. Shine. Repeat.